SRC XPB LOW MASS Bolt Carrier Group w/ DLC Coating

Price: $249.99
SALE PRICE: $189.00
  • Item #: SRCXPBCGLM
  • Manufacturer: Sharps Rifle Company
Availability: *OUT OF STOCK*

Sharps Xtreme Performance Bolt (XPB) Low Mass Carrier Group Complete is precisely machined from S7 tool steel. The XPB undergoes a 24-hour thermal cycle proprietary heat treatment and is finished with DLC (Diamond Like Carbon) Coating.

Technical Data:

Bolt: S7 Tool steel, shot peened DLC coated
Bolt Carrier: S7 Tool steel, shot peened and DLC coated
Gas Key: 4130 Steel, attached with Grade 8 hardware, properly staked and DLC Coated
Cam Pin: 4340 Steel, Manganese Phosphate coated
Firing Pin: Mil Spec firing pin made of 8740 steel, center‐less ground and Hard Chrome coated
Extractor:  4340 Steel, Manganese Phosphate coated
Ejector: S7, shot peened and Manganese Phosphate coated
Extractor Pin: S7, shot peened and Manganese Phosphate coated
Mil-Spec Extractor and Ejector Springs, Firing Pin Retaining Pin, Gas Rings

Batch MPI and HPT tested
Tensile strengths of 1550-1600 mpa, or 220,000-235,000 psi.
Toughness of over 200 ft./lb. Charpy C-Notch
HRC of 46 yields a 15% increase in hardness at the same toughness comparing to Carpenter 158 & 9310

Technical Data on DLC Coating

Coating thickness: 2 - 4 Microns
Hardness HV 0.05: HRC 80+
Deposition method: PVD UBM/PACVD
Friction vs. steel, dry: 0.1
Color: Matte Black

Weight: 9.5oz (BCG Complete) vs 11.2oz (BCG Complete)
Reviews (0) Write a Review
No Reviews. Write a Review